Mapping the CBR

Yup, the pic above is the 3D map of the fuel injection from my CBR. The graphic shows the RPM (Ne(r/min)), Throttle opening (TH(%)) and injection, the air-fuel, ratio (Fi(%)). I got this map from a friend that have intensive experience in mapping racing bike. So it is not my own mapping just yet, but this map can be as a reference point for me to modify it to my liking.

Caution, I have very minimum experience in setting fuel injection/mapping and I still learn as I go. So bare with me and do comments and correct me if I’m wrong.

Dyno Report CBR600RR

Finally, I manage to get my ‘08 CBR600RR dynoed. I took the CRB to Bintang Dyno Facility at Cibinong, and with several run the CBR produced 107HP at the rear wheel. Thanks to Pak Haji Dyan and Samuel that accompany me to the dyno facility and help me to get the CBR to the facility. Thanks also to fellow blogger bengkelsepedamotor.wordpress.com that have helped me to get better understanding about dyno testing.

From the July edition of SportRider magazine, stock CBR600RR produce 102HP@13,500RPM with max torque of 43.6@11,250RPM. Obviously the HRC kit that I have installed bump up the HP and torque figure and I think I’m quite happy with the result. About 5 HP more! hmm not too bad!

Championship standing, National Superbike/FFA 2008

Championship standing till the 4th round. Top 5 is same ol’-same ol’. Matteo has widen the gap with the 2nd position, Ahmad Jayadi. With only 2 round left for the 2008, the race for national championship is getting tighter!

Yours truly is in 16 position with 10 points, I’ve got 5 points each in the 3rd and 4th round. I was lucky as most faster rider then me like Didi, Edy Saputra, Agus, Gabriel, etc were absent. So point for me!